Showing posts with label upcycling. Show all posts
Showing posts with label upcycling. Show all posts

20160301

Balance




One of the issues I ran into with the first recycled denim tote I made was the lack of rigidity in it’s structure. Visually, I like how it turned out, but I felt it was too floppy. There’s this balance that needs to happen between structure and weight that I’m sure a lot of architects would be familiar with. The thinner and lighter the material, the less stress it can withstand. Another secondary issue involved balancing the relationship between aesthetics and function. More embellishment means more weight and structure, but consequently it also means the bag itself will be heavier.

That first bag went in the direction of lightness, with minimal patchwork and embellishment. But with this one, I pushed a little further into a heavier composition of patchwork that wouldn’t be so floppy. There are of course other ways of approaching the structure issue such as adding thin interior pockets for paper/card stock inserts, or even using starch. My interest in raw denim lead me to that starching idea, I should try it some time.

Looking at various constructions for tote bags lead me to the conclusion that the structure is achieved in two parts. The first is the folded over stage in which the strip(s) of material are formed into a flat, enclosed shape. In the second stage, the bottom is pleated to achieve a three dimensional form. From a design perspective, this was quite liberating. Regardless of how you achieve that first flat stage, the pleating of the second stage will always add structure. So I took a cue from Japanese design, specifically from sakabukuro bags which consist of long strips of fabric, spiral seamed into these fantastic diagonal forms. Some of you may remember I’ve used this technique before on a woven scarf called Delete C.




There was a good amount of measurement I had to do before hand, but it all worked out, and my math proved to be sound. Basically what I needed was a long strip of fabric, and I happened to have a composition that fit the exact width in my calculations. As the weeks went by, that length of patchwork denim grew longer until I had reached the required length.




This particular spiral seam consists of an alignment between the center point of the fabric and the center point of the hypotenuse of a 45 degree fold. The fabric is then folded perpendicularly to the hypotenuse until it runs out at the top. I had been working overlapping seams during the patchwork process, so I employed them here on the spiral seam as well. This altered my calculations a bit, but not by much. The hypotenuse of the initial fold then had to be pleated to make the flat ‘foot’ of the bag. I did this on the inside, sewing down the resulting right triangles to get those nice sharp corners.



By the time I got to the handles, I was basically winging it. I didn’t have a plan to deal with those peaks at the top of the bag. Initially, I just wanted to conceal them by folding them inward. Playing with that idea a bit, I decided to fold them in only half way, leaving a nice angular opening on either sides of the folds, but also doubling the fabric where the handles would be sewn in.



When it comes down to it, yes. This tote is more rigid than the last one I made, so in that regard, the goal has been met. I think I can push it further, but the issue isn’t necessarily with the structure, it's with the materials. Denim—especially recycled denim—is broken in, and inherently floppy. That’s it’s charm, but also it’s disqualifier. If I truly want to create rigid structure, what I need to be working with is leather. A patchwork sakabukuro style leather tote. Wouldn’t that be awesome?

Fiber Credits:
Darker denim: Old Navy
Lighter denim: Kikwear
Navy thread: Banana Republic
White thread: Façonnable

20151028

To Remember



Something I don’t share very often is my modest collection of batik textiles. They date back to a short span of years between the late eighties, and early nineties. I know this because they belonged to my mother, and that was the timeframe in which she visited Bali and Java. I guess I don’t share these pieces because I’m reluctant to chop them up. That’s pretty much what I’m doing most of the time: I dismantle things, and make new things out of the pieces.



This particular batik fabric was once an oval table cloth. After my mother died, I asked my father to send me her Balinese textiles, and this tablecloth was one of them. Mom liked these things as much as I do, but apparently she was never good at taking care of them. The damage indicated that it was left on the table for a really long time until the table corners ripped through the fabric. I figured this was a good opportunity as any to harvest this fabric, and make something new.

I like long scarves. I’m sure many of you know that by now. Most of the pieces I’ve designed have been in the range of eight to ten feet. Visually, I’m drawn to this aesthetic. I like thinner, finer fabrics with lot’s of area. If I want it thicker, I can wrap it around twice or even three times.



All together there are six pieces in this patchwork, seamed together with running stitches, then triple whip stitched. There was a lot of ironing and measuring involved. You may have noticed that I leave the raw edges. I like them. In time they will fray, but the whip stitching holds things in place. Something else I did was orient the folds of the seams so that verticals sat on one side, and horizontals sat on the other. Again, this was just me celebrating those raw edges. All together, this piece measures 20in (50cm) wide by 108in (274cm) long.

I never saw this table cloth on the kitchen table in our house on Guam. I wasn’t living on the island anymore at that point, I was here in California. But this piece let’s me be there on that hot little island in the Pacific. There were plants everywhere, and a beach down the street, and humidity that would eat your table linens alive.



20151019

Take the Time



I think a common misconception about my photography is that I make tutorials. Although these photo essays can be seen that way, that's not really my intention. What I'm doing is sharing my creative process in order to help you develop yours. Explicitly telling you step by step how to make something doesn't really help you do that. And let's face it: creative people don't really need to be told how to do anything. They just need to see that it can be done.

I've had quite a few of these small drawstring bags over the years, but I didn't start really using them until I started knitting. These smaller sizes have come in handy the most since I tend to knit hats. They also come in handy when I need to make room in my backpack. I keep a lightweight jacket in there, and if I need the room, I can stuff it into one of these and clip it somewhere.



The basic design is based on common plastic bags which are banned here in San Jose. The bottom consists of an accordion fold that is sealed together on the sides so that it can open and stand upright. The rigidity of this recycled denim paired with the small size allows this bag to do that whether it is empty or full.



Once again I've used this natural white mercerized cotton recycled from a Façonnable sweater. This is the same thread I split down from a triple strand yarn, and used to make my apron and a tote bag. I've doubled it up to seal the drawstring tunnel, and along the side seams where all the structural strength is needed. The whip stitching was done in single strand to keep the edges as smooth and flush to the fabric as possible. I might add to them later. I like that visual variance between the single and double threading. Maybe that's something I can take into the next recycled denim project.



In the Internet Age, we don't need all that step-by-step. We don't need patterns that tell us what to do. Technical craftsmanship is fully searchable now. There's no reason to get hung up on that. Just focus on what you want to make, and just make it. That journey of figuring things out is part of your individual creative process. Take the time to embrace it.



20150912

Fragments



I don't want to rename this project despite how much I hate the name "Fragments." In part I don't care about names at this point. This was a preliminary exercise at best, a way for me to begin looking at the compositional elements and techniques I wanted to employ. It's a rough draft of what would later become Delete Charlie. However, once all those ideas migrated over to that project, I just put this away, and forgot about it. Then other projects took over, and Fragments was just a pair of handwoven textiles sitting around taking up precious space.

So one of those compositional techniques I wanted to use was this idea of seaming. I really latched onto this idea because it effectively opened up the canvas, but also because there was this sense of randomness which later leads to opportunities for improvisation.



I don't have much control while wefting colors together in a handwoven textile. Keeping a count, and making measurements is all I can do. It's more of a prediction than anything. I'm okay with that. Visually, I want all the weft variations to occur in the middle, and the ends to be as plain as possible. So long as the two pieces are reasonably different outside of that, then it'll be fine.

Once the two pieces are seamed together, there is this sense of displacement created. In effect I'm generating a visual discrepancy by merging the two, then harmonizing the visual whole with sashiko embellishment. The two pieces are already unified in color and texture, but the individual weft compositions are what essentially break the grid. Further, the differences in warp widths add more variation to the visual whole.



In addition to the visual differences, there are some physical discrepancies that occur here. The charcoal gray yarn is a two ply single strand, and the light gray is a thinner two ply that is doubled. While they appear to be the same weight, the light gray is slightly thicker, and therefore wefts itself longer. Ten rows of light gray is longer than ten rows of charcoal by about a millimeter. On long stretches of light gray, that length discrepancy becomes significant, and that is where the sashiko comes into play. By using uniform running stitches, the fabric is gathered, similar to smocking. The resulting texture is what takes this composition to another level.



In general, this piece was more about the finishing than the actual loom work. I spent more time on seaming and embellishment than weaving. As I was working on it over the past few months, I came to realize how much I liked this. The seaming, though mundane, felt strangely satisfying. The sashiko stitching became very meditative. I found myself looking forward to working on it. As I look back on all the progress I've posted to my Instagram feed about this project, I'm a bit surprised to discover that it is the single most posted project to date. I was going to post a recap of all of them, but there are just too many images. But hey, I'm sure you've all seen them already, right?

The yarns:
Charcoal gray cotton blend by DKNY
Light gray cotton blend by Old Navy
Black silk seaming thread by Banana Republic

Oh, and my loom:
Emilia 19" rigid heddle loom by Glimakra



20150515

Reflect Echo Three



For one reason or another I haven't knit another Reflect Echo since I introduced it back in 2012. In part it had to do with not having very much of this black merino to work with, but I also knew that the second would be for me (the first one sold rather quickly). Since it was slated as a personal project, it just got backburnered, and ultimately forgotten. I'd pass over this yarn from time to time while digging out other yarns for shop production, and now it's been three years.



I've done a few things differently this time. Firstly I sized up the needles from US2 (2.75 mm) on the original to a US3 (3.25 mm). Aside from making the fabric more fulled, it made the physical act of knitting much easier on the hands. Mainly I just wanted it to be more stretchy, and the four strand structure fluffed out pretty well in that regard.

Another change I made was to the narrow banding. In the original it was a simple band of seed stitch. Due to the angularity of the transitions, the seed stitch bands leaned slightly. Since I found them to be a bit too pronounced anyway, I decided to try alternating purl columns with them in an attempt to keep it all leveled. The result is a more subtle banding that doesn't lean as extremely as the initial version. You can visually tell that there is something different going on in there, but it's not as obvious as the original. I like that. I especially like how the purl stitches align to make thin horizontal lines in these areas.

Here's a shot of the inside. Note the verticality of the seed bands.

I've been steadily incorporating this into various designs over the past year or so, and now the technique I've been referring to as the "full trefoil" has been incorporated into Reflect Echo. What this means is that the columns that comprise the crown decreases at the top are carried throughout the knitting process from the very beginning at the brim. In fact, these decrease columns are plotted in the very first cast on row. This creates some mathematical discrepancies that I won't get into, but visually what this translates to is columns that span from brim to crown, and like in all my hats, they are in sets of three. I like to think of them as support columns because they typically carry the pattern stitches found in the central body of the work. In a lot of ways, these columns unify my work as a whole.



20150430

Try New Things




As some of you may know already, I live in San Jose, California, and we have a plastic bag ban here. I won't get into why I think that's awesome, but it is. But one thing I noticed is how un-awesome the reusable bags I've collected are. They're terrible. And what's more: the growing collection of them is rivaling the previous collection of plastic bags they replaced. When it comes down to it, I only really need a few reusable bags. I never buy more than a few items when I go to the grocery store because I prefer to go more often. It's an opportunity to ride my bike more often, and I like riding my bike.

This tote bag is about as simple as it gets. And believe me when I say that I demonstrated much restraint in over-embellishing it with excessive ideas. With this project, I wanted to try a few things, but not to the point where I over thought the design of something so simple. As with my previous denim patchwork project (my apron), I use a running stitch to patch right sides together, then a whip stitch to seal edges, and reinforce the seams. However, in that project I was joining three strips of fabric together, where each whip stitch seam was parallel to each other. This time, I wanted to see how this technique would translate to the perpendicularity of intersecting seams. Would it be too thick? Will there be structural weakness? Can I even do this correctly?




Okay, well that last question doesn't even apply. I just do what works, and I needed to do this in order to find out. In addition to the intersecting seams, there was this issue with the bottom of the bag. I knew I wanted it to look and fold like a paper bag, but didn't really know how it would come together until I actually did it. It wasn't hard, I just looked at how a brown paper bag is constructed, and went from there.

Ironing was something I did a lot of throughout the construction of this bag, not just for the whip stitch seams, but also to get the bottom to fold the way I wanted. And when I say 'fold,' I refer to not just the sewing construction, and reinforcement. When the bag is empty, I want it to fold down, much like a paper bag does. So in order to maintain the folds, I whip stitched them into place.




I added the small loop tabs on the edges of the bag for various reasons. Mainly, I wanted to be able to clip them onto the belt loops of my jeans, but they can also be used to reduce the size of the opening, or to secure long, protruding things like flowers or baguettes. Because of this project, I feel more confident with patchwork. It's only the second patchwork project I've done. It's liberating. Now I feel better about chucking some of those reusable bags into the recycling bin.

The denim I used was from two pairs of jeans, each with their own photo essay if you'd like to see them getting recycled, step by step. The lighter blue was recycled from a gigantic pair of Kikwear raver jeans, the darker ones are from Old Navy. The thread was split from a multi-strand yarn recycled from a Façonnable men’s sweater.



20150202

Delete Charlie



Sometimes when I start a project, I'll blurt out my idea just to get it out of my head, and into fruition. Sometimes it's spot on in one try, and other times I have to kill the first idea and try again. That's how the creative process works. In order to create a strong body of work, you have to learn to kill your babies, specifically the weak ones. But doing the work, making that first attempt at creating what you know might die is a necessary part of the process.

So the first idea was to knit three narrow bands of garter stitch, and then whip stitch them all together. This is still a pretty solid direction, but after working on it for months, I realized how much I hated the monotony. This first version of this project was the only knitting project I had going for a while, despite the fact that I needed to be knitting hats for my Etsy shop. I was calling it "Fragments" at the time, stupid name, really.

During this time, I was also learning how to weave on a rigid heddle loom that I purchased recently. I was torn. Do I jump into a full-blown weaving project so soon after having learned the most elementary basics of plain weave? Or do I continue to bang out weaving samples parroted from Jane Patrick's book? So boredom with my first idea, and an itch to weave a twelve foot warp lead to what this project turned out to be.



And what it turned out to be is an iteration of my stash-busting series, Delete. Being the third, it is designated Delete Charlie. If you're curious, here are Delete Alpha and Bravo. The twelve foot warp I just mentioned barely diminished, shrinking only six inches to a completed length of 11.5 feet (350.5 cm). The width relaxed down to about 11 in (28 cm).

I don't remember where I mentioned this, but I don't like little tiny scarves. I don't see the point. By tiny, I mean short. This is a very subjective term, I realize, but to me the term 'short scarf' refers to anything that is under five feet (152 cm) or so. I want to drown in it. If I neglect to wrap it around me enough times, I want to be penalized by having it scoop under my feet, and trip me. But this, of course is not that type of long scarf. It could have been, but it's not.

Since this is a circular scarf, the winding around has already been taken care of. I got the idea for this peculiar spiral construction from a bag I saw on SriThreads. I'm intrigued by diagonal geometry in general, and this bag has popped into my head (and my Pinterest feed) on a few occasions. The technique is pretty straight-forward, but the tricky part was determining a reasonable width for the resulting cylinder. In this case, the circumference is about 55 inches (140 cm). I achieved this by modifying the angle to a length that was half of that. It ended up being about 28 inches (71 cm) which is slightly longer to account for some shrinkage.



As far as the seaming goes, I attached selvedge loops to one another as if to introduce a new warp yarn. This created some interesting discrepancies where selvedges of alternated colors met stripe sections along the spiral seam. Because of the slight differences in yarn sizes, there were differing weft heights being joined together. This resulted in portions that looked like deflated balloons, or under-stuffed pillows. I remedied this with little armies of running stitches. It's reminiscent of English smocking, and Japanese sashiko, and the visual texture it created really brings the beauty of plain weave up (quite literally, I suppose) to another level.



I look back on the knitted thing that this piece could have been, and it's so boring in comparison, so ugly. That first idea had to die in order for this one to live. Being creative means having the ability to generate so many ideas that killing some of them is only natural. Additionally, it would be quite arrogant to presume that every idea is good enough to keep. Coming up with bad ideas is just as important as coming up with the good ones. It's all part of the process.



Here are the yarns I used: Brown, Grey, Black/Bronze, Red, and a very brief appearance of Orange.